DL SERIES

The DL Series comes with 2 pairs of square hole Mounting Rails with a bag of 40 M6 Cage Nuts and Screws. Overhead Cable Management is a built in feature and allows cables to access the enclosure. The top can be sealed off with Filler Panels or left open depending upon the cooling solution that has been selected.

Fiber cables can be installed in the built in Cable Tray. Power and data sit in the optional Overhead Tray that can be installed using the DPXOVH-Riser Channel System,see Top Option.

The bottom of the Enclosure is open for raised floor cooling, but can be closed depending upon the cooling solution requirements.

DL PRE-CONFIGURED CABINETS

DL Custom has dedicated design, engineering, manufacturing, professional services team that are hard at work delivering customized pre-configured, pre-integrated, or completely new custom cabinets, all with decreased lead time and cost and increased reliability and quality, allowing data centers to streamline customization and avoid costly, unsafe field modifications.
Made in Canada.

DLC Pre-Configured DL Cabinets is a great solution for your time critical server cabinets requirements. Specially manufactured based on the most popular configuration standards for Data Center, each cabinet is factory configured and is packaged ready-to-ship. Because the components are preloaded and packaged at manufacturing facilities, consistency and quality can be more easily maintained compared to the field where installation environments and skill level can vary considerably. With preloaded components, packaging and waste are also significantly reduced, which makes preconfigured cabinets a much greener option. The operating environment heavily influences recommendations on components such as vents, filters, and gaskets, as well as the type of materials used, and finishes applied to the exterior of an enclosure.

COOLING SOLUTIONS

DL Custom has dedicated design, engineering, manufacturing, professional services team that are hard at work delivering customized pre-configured, pre-integrated, or completely new custom cabinets, all with decreased lead time and cost and increased reliability and quality, allowing data centers to streamline customization and avoid costly, unsafe field modifications. Made in Canada.

Data centers are mission-critical facilities that require constant operation because they are at the core of the customer-business relationship for industries such as finance, healthcare, and telecommunications.

CO-LOCATION

DL Custom has dedicated design, engineering, manufacturing, professional services team that are hard at work delivering customized pre-configured, pre-integrated, or completely new custom cabinets, all with decreased lead time and cost and increased reliability and quality, allowing data centers to streamline customization and avoid costly, unsafe field modifications. Made in Canada.

The Co-Location Cabinet offers superior security for individual client/server applications. These enclosures are configured to be compatible with most server manufacturers. They are available with 2, 4, 6 or 8 doors. Two depths are available, 36” and 42”.Constructed of 14-gauge welded steel frame; 16-gauge doors and side panel.

DLPX 6000 SERIES

The DLPX 6002 series frame contains the ability to house 960 pairs of cables in a single rack. Cable access is achieved through the top and bottom of the large 10″ x 4 ¾” cable boxes in each corner, the largest size of cable manager available. Front to back cable managers are also standard. Cut-outs in the top and bottom panels offer easy access to the cable boxes. Fan-hole cut-outs in the top panel are standard. Doors come standard with a 3-point locking system ensuring security.

The DLPX-6002-44U can accommodate up to 960 pairs of cables in a single cabinet. With our No-U front to rear cable management system shown below and unique key slot design. Cables can be managed in front of the patch panel. Just loosen the screw on the patch panel and slide cable management over the head of the screw.

PRECONFIGURED DPX CABINETS

24” Wide pre-configured 44U server cabinets are available in 36” and 42” Depth.

Features

• Perforated Front and Rear doors with lock
• Two Side panels – Removable
• Removable top with cable entry and knockouts for 4” fans
• Set of four Leveling feet
• Two pairs of adjustable universal mounting rails with “U” Marking
• Cage Nuts and screws (Bag of 40 M6)
• Bonding Studs for grounding
• High Security Locking system

Part Number for 36” Deep by 24” wide
DPX367724-19K1

Part Number for 42” Deep by 24” wide
DPX427724-19K1

DPX-CABINET DOORS AND SIDE PANELS

Front and rear doors are supplied with standard cam locks with a pull handle. All doors are reversible and can be mounted with a left or right side hinge.

The mesh door features 79% open area, the most that anyone can offer in allowing for air flow over servers.

Doors with fan cut-outs help draw hot air out through the rear of the cabinet. In this way the hot aisle cool aisle configuration can be easily achieved.

Dual doors are also available.

Available door options include solid steel, mesh steel, Plexiglas, fan holes and louvered doors. Add the appropriate suffix to the part number. e.x: SMDPX86- 24LD

DLCGS EXTERNAL CABLE MANAGER

The External Cable Manager is a great add-on for your existing cabinets that need cable management or for a new addition. It mounts to the exterior of the cabinet and allows fluid movement from front to back and top to bottom. It comes in a variety of sizes and features top and bottom cable entry and split or full front and rear doors.

This unit is available for a variety of cabinets. Consult with your dealer for details.

DPX CABINET FRAMES

All frames are supplied with two pairs of numbered universal mounting rails, levelers, a bag of 40 M6 clip nuts with screws and casters to make moving the frame easy. Two other standard widths are 24” and 26”. The 24” is a straight 19” rack mount server cabinet. The 26” version can be used for 23” and or 19” rack mount. Universal rails can be provided that are reversible and have a 19” rack mount one side and a 23” rack mount.

DOOR LOCK OPTIONS

All doors come standard with a cam-lock with 2 keys and a pull handle. This single-point lock can be upgraded to a 3-point lock upon request.

PRINT PAGE FILLER PANELS

Filler panels are available to fill empty “U” space allowing for a cleaner more organized appearance. In addition, they block unwanted airflow where necessary. Blank panels are supplied with no-tool fasteners for ease of installation. They can also be punched with a variety of cutouts as shown.

VERTICAL CABLE MANAGEMENT

Vertical Cable Boxes provide a fluent transition of cables throughout the cabinet. These units feature cable entry from the rear and from both sides and come in 4”, 6” and 8” depths. Add the number representing the depth to the end of the part number. Ex: DPXVM-614.

ACCESSORIES

DPX- RISER 2424

The Recessed Base allows you to rough in your cabling needs prior to installing your cabinet. The riser also provides access to floor tiles in front and back of the cabinet after the installation.

SHELVES

Note: For Reinforce shelves use suffix “R”
E.g. FS1915-1R

Shelves are 1U in height.

BOTTOM OPTIONS

BI: The Brush Infill Base closes the gap to the floor when levelers are used to raise the cabinet. See the part number chart to determine the size needed for your layout.

The Anti-Tip Base, shown here, ensures the integrity and safety of your server hardware preventing the cabinet from being pushed over for any reason. At 8” wide and 19” in length, it is certain to offer the peace of mind you need.

MOUNTING ANGLES

Mounting angles come with 10-32 tapped holes or squares holes for cage nuts to support any 19” or 23” EIA standard equipment. When installed in 24” cabinet, they provide a 19” rackmount. When installed in 26” cabinets, they provide a 23” rackmount.

HORIZONTAL CABLE MANAGEMENT

DLHS-19-XCON

This cable manager mounts flush to the mounting rails allowing easy access to all port openings. Comes in 1u, 2u, 3u and 4u.

STORAGE SOLUTIONS-COMPONENTS

These storage cabinets are available in 36” and 48” wide. Both are equipped with full width shelves and feature rugged door construction where it matters most. 3-point locking systems are standard.

They are finished with scratch-resistant powder coat available in Black, Beige or Gray.

ROLL OUT SHELVES AND DOLLIES

Rollout Dollies:

The Rollout dolly is independent of the frame structure and may be removed. Units are 20″ deep and have a weight capacity of 800lb.

STORAGE SOLUTIONS

Filling Drawers:

File pedestals are solid welded 16 gauge cold rolled steel construction. Drawers are also a solid welded construction featuring fully extendable positive stop slides with a 100lb capacity per drawer.

Drawers can be removed from their sliders using the lift-out disconnect release punched into each slider module. Configurations include File/File, Box/File, Box/Box/File, and others. Consult with your dealer for details.

FRAMES

Standard models 24″, 30″, 36″ wide include two vertical columns.
Standard models 48″, 60″, 72″ wide include three vertical columns.

WORKSURFACE

Features:

(A) Heavy duty brackets constructed of 12 gauge cold rolled steel.

(B) 48″, 60″, 72″ wide worksurfaces include center bracket for additional support.

(C) Bull-nosed front edge is standard.

(D) Worksurfaces are manufactured from
1¼ ” Durolam.
48″, 60″, 72″ VEC frames will accommodate either full-width or half width worksurfaces.

EXTENDED CORNER FRAMES

Extended Corner Frames:

All Frames include a 4″*3″ overhead cable tray, adjustable levelers and shortened rear doors for easy cable access.

ACCESSORIES

Sliding Keyboard Tray:

​The Sliding Keyboard Tray has a retractable steel keyboard tray with padded palm rest, is height adjustable 2″ up or down and features a 10 degree negative tilt which locks into the desired position.

Part # DLKBT-22

SHELVES

Standard Shelves:

(A) Shelves are constructed of 14 gauge cold rolled steel.
(B) Shelf support brackets are constructed of 12 gauge cold rolled steel.
(C) All shelves are easily removable and adjustable.
(D) Each shelf is reinforced and pre-punched to enable mounting of modem shelves, keyboard trays and task lights. A center support is standard on 48”, 60” and 72” wide shelves.
(E) Maximum weight recommendation is 800 lbs.
(F) 48”, 60”, 72” VEC frames will accommodate either full width or half width shelves.

HOTLOK

HOTLOK

Rack AirFlow Management

AISLELOK

AISLELOK

Aisle Airflow Management

 

STORAGE CABINET

Storage Cabinet

On site lockable storage for contractor’s tools and equipment.

CABLE PULLER

Cable Puller

Allows easy pulling of up to 12 rolls of cable to designated area.

PDU BRACKETS

PDU brackets allow you to face your outlets to the front, back or side, depending upon the solution required, Brackets will mount all manufactures PDU, give us a call and we will set you up with the right bracket system.

BAYTECH

Going Green!!!

Power Factor is Real and now it’s Real-Time with the MMP Power Solution

Reach operational efficiency and conform to new Green Energy standards with the MMP outlet monitoring solutions.

BayTech’s metered outlet modules report Amps, Voltage, VA, Watts, and power factor per receptacle.

Through our secure SNMP engine thresh- olds can be set to help identify equipment that is running inefficient.

Standard Features

Single Phase and Three Phase

20,30,50,60 Amp Support On, Off, Reboot option HTTPS, SSH, SSL Access Radius, TACACS Authentication Tool less Mounting Unique Features

Modular Design

All Receptacles Monitored Power Factor per Outlet kW Hour Meter per Outlet

Current, Voltage and VA and Watts Reliable PCB Power Distribution Fail Functional Design

POWER BARS – THE TPS SERIES

Power Bars – The TPS Series

DL Custom Power Bars come in several different sizes and configurations.

• 15 Amp or 20 Amp versions available.
• All DLC Power Bars are CSA / UL listed.
• Mounting hardware supplied.
• A 19” rack mounted power bar is available.
• Convenient indicator light shows whether power is flowing.
• Comes with standard 3-prong or twist lock plug.
• Power cable length is 7 ft.
• Add HTLC to the part number for twist lock plug,
Ex: TPS-10HTLC

WALL MOUNT CABINETS

Features:

• These cabinets are reversible allowing the doors to swing out to the left or right hand side by simply flipping the unit.

• Tops and bottoms have two cable entry cutouts and two 4” fan-hole cutouts. In addition, there is one cable entry cutout in the rear.

• The front door uses a cam-lock to secure it to the center section. Access to the rear is provided by opening the center section.

• Doors are available in Plexiglas, solid steel or mesh steel.

• Made of welded 14 gauge steel.


Please Note: The overall depth can be calculated by adding 4” to the useable depth shown in column C.

WALL MOUNT RACKS

SORR WALL-MOUNT RACK

(A) Designed to allow easy access to cables in the rear (behind patch panels or equipment), while maintaining strength and integrity.

(B) A bottom bracket to ‘stop and lock’ the frame in place.

(C) Available in 19” or 23” rack mounts. Dimension C is the depth from the wall, which is available in depths of18” or 25”. For 25” depths use the suffix “25” at the end of the part number.

Ex:SORR3519 for 18” depthSORR351925 for 25” depth

WALL MOUNT BRACKETS

New double hinged wall bracket folds into a flat pack for shipping, call for details 1-855-475-0275

Features:

Used to mount 19″ patch panels where a cabinet is not ideally suitable. Four models are featured to ensure your needs are fully met. Units are available in adjustable depths of 6”-10” or 12”-16”. Custom sizes are available upon request.

VERTICAL CABLE MANAGEMENT FOR RELAY RACKS

Vertical Distribution Managers are available in 8” and 12” widths. The VDM offers quick and easy cable routing for high density cable installation. Optional dual front doors offer easy access to cables and provide an elegant look for your data center. Cable fingers and spools support cables as they move from patch panels and eliminate the need for horizontal cable managers.

Fiber can be routed in a separate fiber retainer and may be purchased separately (see below).

VDM units fit standard DLC racks.
For 77” racks:

VDM units come with mounting hardware and four cable spools.

ADJUSTABLE SERVER RACKS

Features:
Our four-post rack with advanced cable management capabilities for servers, networking and telecom applications features an open design that allows easy access to all your equipment.

It’s available in either a 19” or 23” rack mount and is made of 12 gauge steel with a 5/16” base.

With a weight capacity 2,200 lbs. it’s a cost efficient alternative to cabinets.

This unit adjusts from a 26” to a 42” depth and is available with universal mounting holes or tapped 10/32 holes. Individual racks can be bolted together and can be mounted to the floor.

It comes supplied with 40 cage nuts and screws with easy assembly instructions.

Cable managers are available.

To order:
Add the suffix “T” at the end of the part number for tapped holes and “S” for square holes. e.g. A4P77-19S

VERTICAL CABLE SOLUTION FOR RELAY RACKS

Features:

Each Vertical Distribution Management System has a hinged door for easy access. Doors are supplied with a recessed handle.

Cable guides and ladders are used to distribute wiring in a clean and organized manner through the port holes and into the optional horizontal cable system.

RELAY RACK SHELVING

The standard unit comes 7” tall (4U). Other heights are also available in 1U, 2U, 3U. It can be mounted on a pair of mounting angles and supported at the rear for heavy loads.The FS type of shelf is available in different heights: 1U / 3U / 5U.


STANDARD TELCO RACKS

Features

The DL Custom TELCO Rack is specifically designed to handle all of your telecommunications hardware and cabling.

Each frame is:

(A) One piece welded construction made of 12 GA. C.R.S. that is tapped with 10-32 holes on the front flange.

(B) Holes are provided in the side of the rack for ganging. Bases are provided with cut-outs for bolting units to the floor. Isolator pads and bolting kits are available.

CONTROLLER RACK

Our new design has already proven itself in field applications across the country. The large 4” x 6” cable boxes are actually the frame of the rack and are open top and bottom to allow cable entry. The mounting angles are bolted into the side of the unit, this can be shortened in order to accommodate two servers on the large base of the controller rack. Extended mounted rails with cable cutouts are available to support equipment at the rear, cable rings, protect and guide your cables with the rack. The controller rack is offered in 3 heights 70”, 77” and 84”.

HEAVY DUTY RELAY RACKS

Features

Each frame is:

(A) One piece welded construction made of 12 GA. C.R.S. that is tapped with 10-32 holes on the front flange.

(B) Holes are provided in the side of the rack for ganging. Bases are provided with cut-outs for bolting units to the floor. Isolator pads and bolting kits are available.

STANDARD RELAY RACKS

Features

Each frame is:

(A) One piece welded construction made of 12 GA. C.R.S. that is tapped with 10-32 holes on the front flange.

(B) Holes are provided in the side of the rack for ganging. Bases are provided with cut-outs for bolting units to the floor. Isolator pads and bolting kits are available.

Optional:

To order double tapped rack, add the suffix “DT” to the end of the part number. e.g. RR7019 DT